We bought a patio box a few years ago to store all the boys outside toys. At the time it was really functional for keeping all their toddler riding toys, sand buckets, and their Fisher Price Bubble Mower in one place instead of all over the yard. We even used it as a seat sometimes, but over the years our patio box took a beating. It even had a hole in the top that I'm pretty sure came from a baseball bat. So when I started our patio makeover I knew something had to be done to our old neglected patio box.
The first thing I had to tackle was the big hole in the top of the lid....and it was duct tape to the rescue! I simply used stripes of duct tape on the outside and inside of the lid to seal up the hole.
I bought a piece of foam and cut it to size with a bread knife...I've also heard an electric knife works well for cutting foam, but I was too lazy to dig ours out of the back of the kitchen cabinet:) After removing the lid from the box, I sprayed the lid with spray adhesive and stuck my cut to size piece of foam on it. Then I sprayed the top of the foam with spray adhesive. I placed the fabric upside down on the ground and carefully positioned the foam/lid onto the fabric.
Using screws and my hubby handy drill, we attached the fabric to the lid after wrapping the fabric around the outside edge of the lid. I wasn't sure how a screw would work on the plastic lid, but after we found the right kind of screw it was no problem at all. I have no idea what kind of screw we used, just that some of the ones that we had wouldn't work:)
This is what the inside of the lid looked like after I finished attaching the fabric and foam. If you try this make sure that you pay attention to where the hinges are so that you don't cover them up with fabric. My hinges where on the right side in the picture below which is why it looks different than the other three sides.
I impatiently waited for Jason to get home from work so he could reattach the lid for me. I tried a few times but couldn't figure it out:) Once the lid was in place, we had a great new seating area on our patio!
I bought a piece of foam and cut it to size with a bread knife...I've also heard an electric knife works well for cutting foam, but I was too lazy to dig ours out of the back of the kitchen cabinet:) After removing the lid from the box, I sprayed the lid with spray adhesive and stuck my cut to size piece of foam on it. Then I sprayed the top of the foam with spray adhesive. I placed the fabric upside down on the ground and carefully positioned the foam/lid onto the fabric.
Using screws and my hubby handy drill, we attached the fabric to the lid after wrapping the fabric around the outside edge of the lid. I wasn't sure how a screw would work on the plastic lid, but after we found the right kind of screw it was no problem at all. I have no idea what kind of screw we used, just that some of the ones that we had wouldn't work:)
This is what the inside of the lid looked like after I finished attaching the fabric and foam. If you try this make sure that you pay attention to where the hinges are so that you don't cover them up with fabric. My hinges where on the right side in the picture below which is why it looks different than the other three sides.
I impatiently waited for Jason to get home from work so he could reattach the lid for me. I tried a few times but couldn't figure it out:) Once the lid was in place, we had a great new seating area on our patio!
You can check out the rest of our patio makeover here!